Mizutani logo

Mizutani Blacksmith Fit Thinning 30 Lefty Hair Thinning Scissors

by Mizutani · Thinning Scissors

Discontinued

What it is

Original Mizutani Fit Thinning 30 Lefty: 30% maker ratio, regular 104182 or reverse 104184, Extramarise I and end-of-sale status.

Where to buy

YOI Scissors UK View price Ships from UK Browse all from this brand Link checked 2026-04-03
Scissor Dude View price Ships from USA Browse all from this brand Link checked 2026-04-03
Mizutani USA View price Ships from USA Official Browse all from this brand Link checked 2026-04-03
Mizutani Canada View price Ships from Canada Official Browse all from this brand Link checked 2026-04-03
Mizutani Blacksmith Fit Thinning 30 Lefty Hair Thinning Scissors

Where this sits

The Mizutani Blacksmith Fit Thinning 30 Lefty Hair Thinning Scissors uses Extramarise I Cobalt Alloy.

Fit Thinning 30 Lefty is an original Mizutani left-handed thinning model listed under End of sale. The maker gives both regular and reverse configurations a 30% cut ratio, 57 mm blade and Extramarise I Cobalt Alloy. Product numbers 104182 and 104184 distinguish those configurations from the separate NEW generation.

Original LEFTY identification

The original maker page, reviewed on 30 September 2026, identifies two configurations:

Field Regular Reverse
Product number 104182 104184
Maker cut ratio 30% 30%
Blade length 57 mm 57 mm
Material Extramarise I Cobalt Alloy Extramarise I Cobalt Alloy
Bottom-blade ring, horizontal × vertical 18 × 21 mm 18 × 21 mm
Top-blade ring, horizontal × vertical 19 × 20 mm 19 × 20 mm

Both entries belong to the LEFTY model. A seller saying “reverse” has not, by that word alone, established handedness. Ask for the full name, original product number and photographs of both sides to confirm the offered configuration.

The 30 designation is accompanied by a 30% cut ratio in the specification. The reviewed page does not supply an explicit tooth count or overall inch size. A 57 mm blade measurement should not be converted into a claim that the whole tool is 6.0 inches long.

Original versus NEW Fit Thinning Lefty

The NEW maker record describes different product numbers and dimensions:

Field Original LEFTY NEW LEFTY
Regular product number 104182 104849
Reverse product number 104184 104850
Material Extramarise I Cobalt Alloy Extramarise II Cobalt Alloy
Blade length 57 mm 60 mm
Bottom-blade ring, horizontal × vertical 18 × 21 mm 18 × 23.5 mm
Top-blade ring, horizontal × vertical 19 × 20 mm 17.5 × 20.5 mm

The NEW page has an unresolved ratio discrepancy: its overview and cut-ratio line give 20–25%, but its regular and reverse configuration headings each say 30%. Ask Mizutani or the supplying dealer to confirm the intended specification for 104849 or 104850. Neither value should silently replace the original model’s consistently stated 30%.

The material change documents different maker designations, not a universal quality ranking. The product pages do not establish numerical finished hardness or a full alloy chemistry. Different blade and ring dimensions also mean that the shared Fit name cannot establish identical handling or interchangeable parts.

Ratio, condition and intended work

The original model sits within Mizutani’s volume-control category labeled 30–50%, while its exact configuration entries say 30%. Use the model specification for identification rather than presenting the category range as this pair’s range.

A catalog percentage is not an independent test of every section or technique. When considering an older pair, ask for a demonstration and inspect the teeth, opposing blade and pivot. Previous sharpening, damage and adjustment can matter when assessing catching or inconsistent removal. Disclose that history to a service provider instead of relying on the original alloy name as evidence of present condition.

Photograph, lifecycle and service

The displayed photograph is the main image on the original LEFTY maker page. That page covers both regular and reverse options without separately labeling the main photograph by product number. It therefore illustrates the original LEFTY listing, not proof that a seller’s pair is specifically 104182 or 104184.

Mizutani categorizes this original model as End of sale. The separate NEW listing does not establish continued production of the original. Retailer links remain historical leads: confirm exact stock, photographs, the present quote and return terms before ordering.

For servicing, identify the original code and ask whether the provider accepts that generation and can obtain its components. Supply photographs of both blade faces, pivot and markings. Confirm any proposed replacement component against the exact model rather than assuming it fits because it is sold for a Fit thinner.

See the Mizutani brand page for related records while keeping original and NEW LEFTY specifications separate.

Features

  • Extramarise I Cobalt Alloy named by Mizutani
  • 30% maker cut ratio
  • 57 mm blade length; overall inch size not specified
  • LEFTY model with regular and reverse configurations

Specifications

Handle
Not documented
Blade type
Thinning
Made in
Not documented

This page lists 2 of 4 core specifications. Confirm the exact variant with the seller. Suggest a correction.

How it compares

Similar shears in the same category, side by side (this product first). Open each for full detail and current pricing.
Attribute Mizutani Blacksmith Fit Thinning 30 Lefty Hair Thinning Scissors Mizutani Mizutani Schorem Master Thinning Hair Thinning Scissors Mizutani Mizutani AcroLeaf Wide M 15 Hair Thinning Scissors Mizutani
SteelExtramarise I Cobalt AlloyExtramarise II Cobalt AlloyExtramarise II Cobalt Alloy
Blade typeThinningThinningThinning
Product linksView product View product View product

Professional Opinion

Confirm original LEFTY product 104182 or 104184 before comparing an offer with NEW Fit Thinning Lefty. Regular and reverse are two configurations within this left-handed model, while generation changes the material, blade length and ring dimensions.

Maintenance Tips

  • Provide the product number and photographs before arranging service
  • Ask for inspection of the toothed blade, opposing blade and pivot together
  • Confirm parts and adjustment instructions for the exact model

Frequently Asked Questions

What distinguishes regular and reverse Fit Thinning 30 Lefty?

Mizutani lists original LEFTY product 104182 as regular and 104184 as reverse. Both have a 30% maker cut ratio, a 57 mm blade and Extramarise I Cobalt Alloy. Regular and reverse distinguish configurations within the LEFTY model; reverse does not itself mean left-handed.

Is Fit Thinning 30 Lefty a 30-tooth, 6.0-inch model?

The reviewed maker record gives a 30% cut ratio and 57 mm blade length, without an explicit tooth count or overall inch designation. Neither the model number nor blade length establishes those missing specifications.

Is the original model the same as NEW Fit Thinning Lefty?

No. Original regular/reverse codes 104182/104184 use Extramarise I and a 57 mm blade. NEW codes 104849/104850 use Extramarise II and a 60 mm blade, with different ring dimensions. The NEW page also conflicts internally: its overview says 20–25%, while configuration headings say 30%.

Can the original Fit Thinning 30 Lefty still be bought or serviced?

The maker places the original in End of sale. Remaining stock, used condition and service or parts availability require separate confirmation. Give the provider the original product number and photographs; the shared Fit name does not establish compatibility with NEW parts.

Sources

  1. Mizutani: original Fit THINNING 30 LEFTY, regular and reverse (brand official)
  2. Mizutani: NEW Fit THINNING LEFTY generation and ratio discrepancy (brand official)

Source scope and limitations are stated on the page. External links open in new tabs.

About Mizutani

Origin: Japan • Est: 1921

Mizutani, founded in 1921: compare exact model materials, published manufacturing records and regional service contacts.

Products:
Cutting Scissors Thinning Scissors Left-Handed Scissors
Retailer links, pricing, and specifications notice

About pricing and availability: Guide prices shown are approximate as of the date noted and are provided for comparison purposes only. Actual prices are set by each retailer and may differ. ScissorPedia does not sell scissors directly.

Retailer links: Links to retailer product pages were verified on the dates shown. Products may be renamed, moved, or discontinued by retailers at any time. If a link is broken, try the retailer's brand collection page or let us know.

Specifications: Product details are compiled from manufacturer and retailer sources. For the most current specifications, contact the manufacturer or an authorized retailer directly.

Read our full disclaimer.

Community notes

Ratings & reviews

Own the Mizutani Blacksmith Fit Thinning 30 Lefty Hair Thinning Scissors? Rate it and share how it performs to help other professionals.