Mizutani AcroLeaf Wide M 50 Hair Thinning Scissors
by Mizutani · Thinning Scissors
What it is
Mizutani Acroleaf Wide M-50: product 104128, 40–50% maker cut ratio, Extramarise II alloy and a 63 mm blade; buying and service checks.
Where to buy
Where this sits
The Mizutani AcroLeaf Wide M 50 Hair Thinning Scissors uses Extramarise II Cobalt Alloy.
Acroleaf Wide M-50 is a Mizutani thinning scissor identified by product number 104128. The maker specifies a 40–50% cut ratio, Extramarise II Cobalt Alloy and a 63 mm blade. Compare that documented ratio with the intended hair section; the model number does not establish tooth count or overall inch size.
Model identification and measurements
The Mizutani model record, reviewed on 30 September 2026, supplies the following identifiers:
| Field | Maker specification |
|---|---|
| Model | Acroleaf Wide M-50 |
| Product number | 104128 |
| Cut ratio | 40–50% |
| Material | Extramarise II Cobalt Alloy |
| Blade length | 63 mm |
| Bottom-blade ring, horizontal × vertical | 18 × 21 mm |
| Top-blade ring, horizontal × vertical | 18 × 21 mm |
Blade length is a different measurement from the overall inch size used in many shop listings. The reviewed record does not supply an overall size or an explicit tooth count. If either matters when replacing a familiar pair, ask the seller for those measurements rather than translating the model suffix into a specification.
Cut ratio and comparison
Its exact 40–50% range sits within the site’s broader volume-control category labeled 30–50%; the category does not lower this model’s stated range to 30%.
| Exact model | Maker cut ratio | Product number |
|---|---|---|
| Acroleaf Wide M-15 | 5–15% | 104124 |
| Acroleaf Wide M-50 | 40–50% | 104128 |
M-50 has the higher published removal range in this comparison. Describing it as a minimal-removal polishing tool would conflict with that specification. A high stated ratio also does not establish the result of a particular pass on a particular section.
The Acroleaf Wide M-15 is a separate model, despite the shared material name and blade length. The maker’s family explanation says the angle to the section changes removal, but its illustrated example expressly uses M-25. That illustration is not a measured technique chart for Acroleaf Wide M-50.
When comparing demonstrations, keep the section, insertion depth, angle and number of passes consistent enough to judge the result. Ask whether the demonstration uses the exact model and a recently serviced pair. Neither a family description nor a photograph establishes how a worn or damaged pair will behave.
Material, fit and service
Mizutani names Extramarise II Cobalt Alloy for this model. The product record does not publish numerical finished hardness or a full chemical specification. The alloy label therefore cannot quantify service intervals or predict how long an individual pair will retain its cutting condition.
The ring measurements help compare dimensions, but they do not guarantee a comfortable grip. Ask about inserts and try the handle where possible. Before service, provide the model number and photographs of the pivot and both blade faces; report catching, impact or previous sharpening so the provider can assess the pair’s condition.
Photograph and buying checks
The displayed maker photograph shows the exact Acroleaf Wide M-50 listing, including its toothed blade and model marking. It identifies the catalog presentation, not the condition of a seller’s item. Request photographs of the offered pair and check the marking against product 104128.
The reviewed maker page is accessible, but that alone does not establish current production, local stock, price or delivery. The retailer links below remain leads to check for the exact configuration. Ask for a current quote, return terms, service options and an explicit overall measurement before ordering.
See the Mizutani brand page for related models and compare each against its own specification.
Features
- Extramarise II Cobalt Alloy named by Mizutani
- 40–50% maker cut ratio
- 63 mm blade length; overall inch size not specified
- Both blade rings measure 18 × 21 mm
Specifications
This page lists 2 of 4 core specifications. Confirm the exact variant with the seller. Suggest a correction.
How it compares
| Attribute | Mizutani AcroLeaf Wide M 50 Hair Thinning Scissors Mizutani | Mizutani AcroLeaf Wide M 15 Hair Thinning Scissors Mizutani | Mizutani Schorem Master Thinning Hair Thinning Scissors Mizutani |
|---|---|---|---|
| Steel | Extramarise II Cobalt Alloy | Extramarise II Cobalt Alloy | Extramarise II Cobalt Alloy |
| Blade type | Thinning | Thinning | Thinning |
| Product links | View product | View product | View product |
Professional Opinion
Assess this model as a higher-removal option: Mizutani gives 40–50%, well above M-15’s 5–15%. Check the intended section and finish before buying; the number 50 does not establish fifty teeth or a light finishing cut.
Maintenance Tips
- Provide the product number and photographs before arranging service
- Ask for inspection of the toothed blade, opposing blade and pivot together
- Confirm parts and adjustment instructions for the exact model
Frequently Asked Questions
What cut ratio does the Acroleaf Wide M-50 have?
Mizutani specifies 40–50% for product 104128. This is the exact model rating, not a tooth count or a guarantee of identical removal on every hair section. The maker’s broader use category is a separate label.
Does Acroleaf Wide M-50 mean 50 teeth?
The reviewed maker specification does not state a tooth count. Identify the model by its name and product number, then ask for an explicit count if that matters for your comparison. Do not derive it from the suffix.
How does it compare with Acroleaf Wide M-15?
The Acroleaf Wide M-50 has a 40–50% maker rating; M-15 has 5–15%. Both reviewed records list Extramarise II Cobalt Alloy and a 63 mm blade. Their different cut-ratio ranges are more useful than assuming a removal level from their model numbers.
Is Acroleaf Wide M-50 a 6.0-inch scissor currently in stock?
The maker page gives a 63 mm blade length, without an overall inch designation. Its accessible listing does not establish factory production or seller stock. Confirm the exact product number, overall measurement, present quote and service support with the seller.
Sources
- Mizutani: Acroleaf WIDE M-15, product 104124 (brand official)
- Mizutani: Acroleaf WIDE M-50, product 104128 (brand official)
About Mizutani
Mizutani, founded in 1921: compare exact model materials, published manufacturing records and regional service contacts.
Retailer links, pricing, and specifications notice
About pricing and availability: Guide prices shown are approximate as of the date noted and are provided for comparison purposes only. Actual prices are set by each retailer and may differ. ScissorPedia does not sell scissors directly.
Retailer links: Links to retailer product pages were verified on the dates shown. Products may be renamed, moved, or discontinued by retailers at any time. If a link is broken, try the retailer's brand collection page or let us know.
Specifications: Product details are compiled from manufacturer and retailer sources. For the most current specifications, contact the manufacturer or an authorized retailer directly.
Ratings & reviews
Own the Mizutani AcroLeaf Wide M 50 Hair Thinning Scissors? Rate it and share how it performs to help other professionals.