Mizutani logo

Mizutani AcroLeaf Wide M 15 Hair Thinning Scissors

by Mizutani · Thinning Scissors

Listed by manufacturer

What it is

Mizutani Acroleaf Wide M-15: product 104124, 5–15% maker cut ratio, Extramarise II alloy and a 63 mm blade; buying and service checks.

Where to buy

YOI Scissors UK View price Ships from UK Browse all from this brand Link checked 2026-04-03
Scissor Dude View price Ships from USA Browse all from this brand Link checked 2026-04-03
Mizutani USA View price Ships from USA Official Browse all from this brand Link checked 2026-04-03
Mizutani Canada View price Ships from Canada Official Browse all from this brand Link checked 2026-04-03
Mizutani AcroLeaf Wide M 15 Hair Thinning Scissors

Where this sits

The Mizutani AcroLeaf Wide M 15 Hair Thinning Scissors uses Extramarise II Cobalt Alloy.

Acroleaf Wide M-15 is a Mizutani thinning scissor identified by product number 104124. The maker specifies a 5–15% cut ratio, Extramarise II Cobalt Alloy and a 63 mm blade. Compare that documented ratio with the intended hair section; the model number does not establish tooth count or overall inch size.

Model identification and measurements

The Mizutani model record, reviewed on 30 September 2026, supplies the following identifiers:

Field Maker specification
Model Acroleaf Wide M-15
Product number 104124
Cut ratio 5–15%
Material Extramarise II Cobalt Alloy
Blade length 63 mm
Bottom-blade ring, horizontal × vertical 18 × 21 mm
Top-blade ring, horizontal × vertical 18 × 21 mm

Blade length is a different measurement from the overall inch size used in many shop listings. The reviewed record does not supply an overall size or an explicit tooth count. If either matters when replacing a familiar pair, ask the seller for those measurements rather than translating the model suffix into a specification.

Cut ratio and comparison

Its exact 5–15% range extends beyond the site’s broader texture-control category labeled 3–10%; use the model range when identifying this pair.

Exact model Maker cut ratio Product number
Acroleaf Wide M-15 5–15% 104124
Acroleaf Wide M-50 40–50% 104128

M-15’s lower published range makes it the lower-removal option in this particular comparison. It does not prove a smoother finish, absence of marks or a universally better choice for fine hair.

The Acroleaf Wide M-50 is a separate model, despite the shared material name and blade length. The maker’s family explanation says the angle to the section changes removal, but its illustrated example expressly uses M-25. That illustration is not a measured technique chart for Acroleaf Wide M-15.

When comparing demonstrations, keep the section, insertion depth, angle and number of passes consistent enough to judge the result. Ask whether the demonstration uses the exact model and a recently serviced pair. Neither a family description nor a photograph establishes how a worn or damaged pair will behave.

Material, fit and service

Mizutani names Extramarise II Cobalt Alloy for this model. The product record does not publish numerical finished hardness or a full chemical specification. The alloy label therefore cannot quantify service intervals or predict how long an individual pair will retain its cutting condition.

The ring measurements help compare dimensions, but they do not guarantee a comfortable grip. Ask about inserts and try the handle where possible. Before service, provide the model number and photographs of the pivot and both blade faces; report catching, impact or previous sharpening so the provider can assess the pair’s condition.

Photograph and buying checks

The displayed maker photograph shows the exact Acroleaf Wide M-15 listing, including its toothed blade and model marking. It identifies the catalog presentation, not the condition of a seller’s item. Request photographs of the offered pair and check the marking against product 104124.

The reviewed maker page is accessible, but that alone does not establish current production, local stock, price or delivery. The retailer links below remain leads to check for the exact configuration. Ask for a current quote, return terms, service options and an explicit overall measurement before ordering.

See the Mizutani brand page for related models and compare each against its own specification.

Features

  • Extramarise II Cobalt Alloy named by Mizutani
  • 5–15% maker cut ratio
  • 63 mm blade length; overall inch size not specified
  • Both blade rings measure 18 × 21 mm

Specifications

Handle
Not documented
Blade type
Thinning
Made in
Not documented

This page lists 2 of 4 core specifications. Confirm the exact variant with the seller. Suggest a correction.

How it compares

Similar shears in the same category, side by side (this product first). Open each for full detail and current pricing.
Attribute Mizutani AcroLeaf Wide M 15 Hair Thinning Scissors Mizutani Mizutani AcroLeaf Wide M 50 Hair Thinning Scissors Mizutani Mizutani Schorem Master Thinning Hair Thinning Scissors Mizutani
SteelExtramarise II Cobalt AlloyExtramarise II Cobalt AlloyExtramarise II Cobalt Alloy
Blade typeThinningThinningThinning
Product linksView product View product View product

Professional Opinion

Use the maker’s low cut-ratio range to assess texture work; the model number is not a tooth-count specification. Compare section results and handle fit before choosing it over a higher-removal thinner.

Maintenance Tips

  • Provide the product number and photographs before arranging service
  • Ask for inspection of the toothed blade, opposing blade and pivot together
  • Confirm parts and adjustment instructions for the exact model

Frequently Asked Questions

What cut ratio does the Acroleaf Wide M-15 have?

Mizutani specifies 5–15% for product 104124. This is the exact model rating, not a tooth count or a guarantee of identical removal on every hair section. The maker’s broader use category is a separate label.

Does Acroleaf Wide M-15 mean 15 teeth?

The reviewed maker specification does not state a tooth count. Identify the model by its name and product number, then ask for an explicit count if that matters for your comparison. Do not derive it from the suffix.

How does it compare with Acroleaf Wide M-50?

The Acroleaf Wide M-15 has a 5–15% maker rating; M-50 has 40–50%. Both reviewed records list Extramarise II Cobalt Alloy and a 63 mm blade. Their different cut-ratio ranges are more useful than assuming a removal level from their model numbers.

Is Acroleaf Wide M-15 a 6.0-inch scissor currently in stock?

The maker page gives a 63 mm blade length, without an overall inch designation. Its accessible listing does not establish factory production or seller stock. Confirm the exact product number, overall measurement, present quote and service support with the seller.

Sources

  1. Mizutani: Acroleaf WIDE M-15, product 104124 (brand official)
  2. Mizutani: Acroleaf WIDE M-50, product 104128 (brand official)

Source scope and limitations are stated on the page. External links open in new tabs.

About Mizutani

Origin: Japan • Est: 1921

Mizutani, founded in 1921: compare exact model materials, published manufacturing records and regional service contacts.

Products:
Cutting Scissors Thinning Scissors Left-Handed Scissors
Retailer links, pricing, and specifications notice

About pricing and availability: Guide prices shown are approximate as of the date noted and are provided for comparison purposes only. Actual prices are set by each retailer and may differ. ScissorPedia does not sell scissors directly.

Retailer links: Links to retailer product pages were verified on the dates shown. Products may be renamed, moved, or discontinued by retailers at any time. If a link is broken, try the retailer's brand collection page or let us know.

Specifications: Product details are compiled from manufacturer and retailer sources. For the most current specifications, contact the manufacturer or an authorized retailer directly.

Read our full disclaimer.

Community notes

Ratings & reviews

Own the Mizutani AcroLeaf Wide M 15 Hair Thinning Scissors? Rate it and share how it performs to help other professionals.