Mizutani Sword Thinning 30 Hair Thinning Scissors
by Mizutani · Thinning Scissors
What it is
Mizutani Sword Thinning 30: original model with a maker-rated 10% cut ratio, Extramarise II alloy, variant codes and end-of-sale status.
Where to buy
Where this sits
The Mizutani Sword Thinning 30 Hair Thinning Scissors uses Extramarise II Cobalt Alloy.
Sword Thinning 30 is an original Mizutani thinning model with a maker-specified 10% cut ratio in regular and reverse versions. Mizutani identifies its material as Extramarise II Cobalt Alloy and places it in the End of sale catalog. Product codes help distinguish these versions when buying an older pair or requesting service.
Original model and identification
The original Sword Thinning 30 maker record, checked on 30 September 2026, supplies these specifications:
| Configuration | Maker product number | Published cut ratio | Blade length |
|---|---|---|---|
| Regular | 102075 | 10% | 60 mm |
| Reverse | 102078 | 10% | 60 mm |
For both configurations, the maker gives the bottom-blade ring as 18 mm horizontally by 19 mm vertically and the top-blade ring as 17 mm by 19 mm. These measurements describe the rings, not hand fit or overall scissor length. The reviewed page does not supply a nominal inch size.
The regular and reverse labels are important ordering details. Record the product number as well as the model name, and ask the seller which configuration is offered. The maker’s reverse label does not, by itself, identify a dedicated left-handed tool. A catalog photograph also cannot confirm which configuration a seller has in stock.
What the 10% rating tells you
Mizutani puts this model in its texture-control category, labeled 3–10%, and separately specifies 10% for both versions. The category’s wider range should not replace the exact model rating. The original Sword Thinning 40 carries a 20% rating in its own maker record.
That makes the 30 the lower-rated option within this pair of original models. It does not establish an independently tested amount removed from every section, or guarantee a particular blend. When assessing a used pair, ask for a demonstration with a suitable section and check for pulling, incomplete closure or damaged teeth before judging the result by the rating alone.
Material and service checks
The stated material is Extramarise II Cobalt Alloy. The reviewed model record gives no numerical finished hardness or Damascus construction. Mizutani’s accompanying SWORD description discusses a carbon resin bearing and a titanium-plated wave washer; it is not a parts interchangeability chart for later SWORD generations.
For service, provide photographs of the markings, pivot and toothed blade together with the regular or reverse code. Describe any pulling or catching, previous sharpening and known drops. Ask whether the provider can assess both blades and obtain the appropriate pivot components. A shared series name is insufficient evidence that a newer bearing or screw will fit.
Buying an older pair
End of sale is the maker’s catalog status. It does not establish whether a particular retailer still holds unused stock or whether a used pair remains serviceable. The retailer links retain their earlier catalog context; they are not a fresh stock, price or warranty check. Obtain an item-specific quote and confirm condition, support and return terms.
The photograph comes from the exact original maker page. It shows the catalog’s SWORD thinning tool, including the maker’s end-of-sale notice; it does not show the condition or configuration of a seller’s individual pair.
Other sizes in this series
This catalog groups the two original thinning models for comparison:
The retained 30T and 40T variant labels identify the catalog choices rather than overall inch lengths. The maker specifies the same alloy and 60 mm blade length for both, but different cut ratios. Their tooth layouts should not be treated as identical blade geometry.
See the Mizutani brand page for the wider catalog, and confirm each model’s generation before transferring specifications.
Features
- Extramarise II Cobalt Alloy named by Mizutani
- 10% cut ratio specified for regular and reverse versions
- 60 mm blade length; overall inch size not specified
- Historical model in Mizutani’s End of sale catalog
Specifications
This page lists 2 of 4 core specifications. Confirm the exact variant with the seller. Suggest a correction.
How it compares
| Attribute | Mizutani Sword Thinning 30 Hair Thinning Scissors Mizutani | Mizutani Sword Thinning 40 Hair Thinning Scissors Mizutani | Mizutani Schorem Master Thinning Titanium Black Hair Thinning Scissors Mizutani |
|---|---|---|---|
| Steel | Extramarise II Cobalt Alloy | Extramarise II Cobalt Alloy | Extramarise II Cobalt Alloy |
| Blade type | Thinning | Thinning | Thinning |
| Product links | View product | View product | View product |
Professional Opinion
Use the maker’s 10% rating to distinguish this original model from Sword Thinning 40 at 20%. Match the regular or reverse product code before comparing an older pair; actual results and service needs depend on the tool and how it is used.
Maintenance Tips
- Give the exact model and product number when requesting service
- Ask the service provider to assess the teeth, opposing blade and pivot together
- Confirm original-model parts and service acceptance before buying an older pair
Frequently Asked Questions
What is the original Sword Thinning 30 cut ratio?
Mizutani specifies 10% for both its regular and reverse versions. The original Sword Thinning 30 is rated at 10% and Sword Thinning 40 at 20%. These are maker specifications, not independently measured results for every cutting technique or hair section.
Which codes identify the regular and reverse versions?
For original Sword Thinning 30, Mizutani lists regular as 102075 and reverse as 102078. Keep those configurations distinct when ordering or requesting service. The reviewed listing does not identify the reverse option as a dedicated left-handed model.
Is Sword Thinning 30 a 6.0-inch Damascus model?
The exact historical maker page names Extramarise II Cobalt Alloy and a 60 mm blade length. It does not state a 6.0-inch overall size, Damascus construction or numerical finished hardness. A blade measurement cannot be substituted for the overall scissor size.
Can I still buy or service the original model?
Mizutani places it in the End of sale section. Remaining stock, used or refurbished offers and service support require separate confirmation. Ask for the product code, photographs of the actual pair, sharpening history, available parts and the seller’s return terms.
Sources
About Mizutani
Mizutani, founded in 1921: compare exact model materials, published manufacturing records and regional service contacts.
Retailer links, pricing, and specifications notice
About pricing and availability: Guide prices shown are approximate as of the date noted and are provided for comparison purposes only. Actual prices are set by each retailer and may differ. ScissorPedia does not sell scissors directly.
Retailer links: Links to retailer product pages were verified on the dates shown. Products may be renamed, moved, or discontinued by retailers at any time. If a link is broken, try the retailer's brand collection page or let us know.
Specifications: Product details are compiled from manufacturer and retailer sources. For the most current specifications, contact the manufacturer or an authorized retailer directly.
Ratings & reviews
Own the Mizutani Sword Thinning 30 Hair Thinning Scissors? Rate it and share how it performs to help other professionals.