Mizutani logo

Mizutani Sword Swivel S-02 Hair Cutting Scissors

by Mizutani · Cutting Scissors

Discontinued

What it is

Original Mizutani SWIVEL S-02: Extramarise II Cobalt Alloy, two sizes, rotating thumb ring and documented fit options.

Available sizes

5.7" 6.2"

Where to buy

YOI Scissors UK View price Ships from UK Browse all from this brand Link checked 2026-04-03
Mizutani USA View price Ships from USA Official Browse all from this brand Link checked 2026-04-03
Mizutani Canada View price Ships from Canada Official Browse all from this brand Link checked 2026-04-03
Mizutani Sword Swivel S-02 Hair Cutting Scissors

Where this sits

The Mizutani Sword Swivel S-02 Hair Cutting Scissors uses Extramarise II Cobalt Alloy.

SWIVEL S-02 is a historical Mizutani hair-cutting scissor with a rotating thumb ring and Extramarise II Cobalt Alloy. Its two documented sizes have distinct product numbers. The maker lists three ring options and places this generation in End of sale, so check the fitted ring, condition and service support separately.

SWIVEL S-02

Original sizes and identification

Maker size Blade length Maker product number
5.7 inches 56.9 mm 102172
6.2 inches 64.8 mm 102173

Mizutani’s historical S-02 page, checked on 30 September 2026, gives these dimensions and assigns the model to blunt cutting. Keep nominal inch size separate from measured blade length. When comparing an offer, ask for the exact product number and a photograph of the pair rather than relying on a shortened SWORD Swivel title.

The listed material is Extramarise II Cobalt Alloy. No Damascus layering, complete chemistry or numerical finished hardness is supplied for this model. Material identification comes from the maker specification; a plain-looking blade or a higher asking price does not establish an alloy or treatment.

Rotating ring and fit options

The maker describes a thumb ring that rotates through 360 degrees and a mechanism using two ball bearings. Its ring options are listed as follows:

Ring option Maker-listed opening dimensions
S 15.5 × 16.5 mm
M 17 × 17.5 mm
L, described as the regular size 18.5 × 19.5 mm

The product specification gives the bottom-blade ring as 18.5 mm horizontally by 19.5 mm vertically and the top-blade ring as 17 mm by 19 mm. The alternative ring openings are fit options, not additional blade sizes. Confirm which ring is fitted; the historical list does not establish that every option remains available today.

A rotating ring changes the thumb’s movement relative to the handle. Trying the actual pair helps reveal whether the opening, rotation and finger position suit your work. Rotation alone does not guarantee comfort or a particular cutting result. Check the ring movement and the opening-and-closing action of the blades as separate features during a demonstration.

Comparing S-02 with S-01

The original S-01 record names the same material and lists the same nominal sizes and blade lengths, using product numbers 102170 and 102171. S-02 uses 102172 and 102173. These identifiers distinguish models; they do not establish a higher-grade Damascus progression. The S-01 product page also distinguishes its original model from the separately documented NEW generation.

Ask the seller or service provider to identify the actual handle configuration, ring and generation. Do not assume that a ring, bearing or pivot part is interchangeable merely because two models share sizes or material wording.

Buying and servicing an older pair

The exact maker photograph shows the historical S-02 presentation. It does not establish the size, ring option, condition or stock of a seller’s pair. Request photographs of the markings, ring connection, pivot and blades, together with previous sharpening or repair history.

Before buying, obtain a current quote and confirm service acceptance and parts availability. For a problem with ring movement or blade action, describe the symptom separately and ask for model-specific adjustment guidance. The maker’s End of sale classification concerns this generation; it does not determine whether a retailer has unused remaining stock.

See the Mizutani brand page for wider catalog context, keeping each model’s specifications and service questions distinct.

Features

  • Extramarise II Cobalt Alloy named by Mizutani
  • Rotating thumb ring with three maker-listed ring options
  • Two original sizes with individual product numbers
  • Maker-designated blunt-cutting use

Specifications

Handle
Swivel
Blade type
Not documented
Made in
Not documented

This page lists 2 of 4 core specifications. Confirm the exact variant with the seller. Suggest a correction.

How it compares

Similar shears in the same category, side by side (this product first). Open each for full detail and current pricing.
Attribute Mizutani Sword Swivel S-02 Hair Cutting Scissors Mizutani Mizutani Sword Dama D-07 Hair Cutting Scissors Mizutani Mizutani Sword Wood Hair Cutting Scissors Mizutani
SteelExtramarise II Cobalt AlloyPowder Damascus alloyDamascus
HandleSwivelNot listedOffset
Sizes (in)5.7· 6.25.7· 6.2· 6.75.5· 6.0
Product linksView product View product View product

Professional Opinion

Compare the ring opening and the freedom of movement on the actual pair before choosing S-02. Match the original product number and ring option, then confirm service support for both the blade pivot and the rotating ring.

Maintenance Tips

  • Obtain maker instructions for the exact mechanism and configuration
  • Identify the product number when requesting parts or repairs
  • Confirm current service support before purchasing an older pair

Frequently Asked Questions

What material does the original SWIVEL S-02 use?

Mizutani names Extramarise II Cobalt Alloy. The exact historical page does not specify Damascus construction or numerical finished hardness. S-02 is a model identifier, not a steel-layer grade.

Which S-02 sizes and product numbers are documented?

The maker lists 5.7 inches as product 102172 with a 56.9 mm blade, and 6.2 inches as product 102173 with a 64.8 mm blade. These identify the historical S-02 generation.

What ring sizes and rotation does the maker describe?

The page describes 360-degree thumb-ring rotation and two ball bearings. It lists S at 15.5 by 16.5 mm, M at 17 by 17.5 mm and L at 18.5 by 19.5 mm, with L as the regular size. Confirm the ring fitted to the offered pair and the availability of replacement options.

How does S-02 compare with the original S-01?

The two historical maker pages name the same material and the same nominal sizes and blade lengths, but use different product numbers. Their names alone do not establish a steel-quality or price hierarchy. Identify the actual handle configuration and try its movement before deciding.

Sources

  1. Mizutani: original SWIVEL S-02 mechanism, dimensions and ring options (manufacturer specification)
  2. Mizutani: original SWIVEL S-01 (manufacturer specification)

Source scope and limitations are stated on the page. External links open in new tabs.

About Mizutani

Origin: Japan • Est: 1921

Mizutani, founded in 1921: compare exact model materials, published manufacturing records and regional service contacts.

Products:
Cutting Scissors Thinning Scissors Left-Handed Scissors
Retailer links, pricing, and specifications notice

About pricing and availability: Guide prices shown are approximate as of the date noted and are provided for comparison purposes only. Actual prices are set by each retailer and may differ. ScissorPedia does not sell scissors directly.

Retailer links: Links to retailer product pages were verified on the dates shown. Products may be renamed, moved, or discontinued by retailers at any time. If a link is broken, try the retailer's brand collection page or let us know.

Specifications: Product details are compiled from manufacturer and retailer sources. For the most current specifications, contact the manufacturer or an authorized retailer directly.

Read our full disclaimer.

Community notes

Ratings & reviews

Own the Mizutani Sword Swivel S-02 Hair Cutting Scissors? Rate it and share how it performs to help other professionals.