Mizutani Blacksmith Fit Puffin Thinning 14 Hair Thinning Scissors
by Mizutani · Thinning Scissors
What it is
Original Mizutani Fit Puffin Thinning 14: reverse 30–40% maker cut ratio, Extramarise I alloy, product 104236 and end-of-sale status.
Where to buy
Where this sits
The Mizutani Blacksmith Fit Puffin Thinning 14 Hair Thinning Scissors uses Extramarise I Cobalt Alloy.
Fit Puffin Thinning 14 is an original Mizutani thinning model specified in reverse configuration with a 30–40% maker cut ratio. Its material is Extramarise I Cobalt Alloy, and its product number is 104236. Mizutani places this generation in End of sale; identify the exact pair before comparing stock or service options.
Original model and configuration
The original Fit Puffin Thinning 14 maker page, checked on 30 September 2026, supplies these details:
| Field | Original model specification |
|---|---|
| Product number | 104236 |
| Configuration | Reverse |
| Maker cut ratio | 30–40% |
| Blade length | 63 mm |
| Material | Extramarise I Cobalt Alloy |
| Bottom-blade ring, horizontal × vertical | 18 × 21 mm |
| Top-blade ring, horizontal × vertical | 19 × 20 mm |
The reviewed page gives a blade length, not an overall inch designation. It lists this reverse configuration and links separately to a LEFTY model. Reverse should therefore not be read as a left-handed specification, and a regular configuration or its code cannot be supplied from this record.
What the cut ratio supports
Mizutani recommends the model for volume adjustment and scissor-over-comb work. Its volume-control category is labeled 30–50%, while the exact product ratio is 30–40%. Use the model range when making a comparison; the broader category is not an additional specification for this pair.
The original Puffin Thinning 17 is rated at 20–30%. The ranges differ and meet at 30%; they do not establish a fixed difference in hair removal for every section or technique. Neither the model number nor an image alone proves that the 14 must produce aggressive disconnection or that another thinner will blend invisibly.
For a practical comparison, confirm the configuration and inspect the teeth and opposing blade on the actual pair. Ask for a suitable cutting demonstration and explain whether the work involves volume adjustment or scissor-over-comb. Keep observed pulling, catching or finish attached to that tool and its condition.
Material, fit and service
The original model’s named alloy is Extramarise I Cobalt Alloy. The reviewed product record does not supply complete chemistry or numerical finished hardness. Mizutani’s broader heat-treatment description cannot fill those missing measurements.
The ring dimensions can help identify the documented handle, but do not establish comfort or a health benefit. For servicing an older pair, provide the product number, photographs of both sides and the pivot, and any sharpening or repair history. Ask whether the provider can assess the teeth and opposing blade together and obtain appropriate parts.
Photograph and availability
The displayed image is the exact original 14 photograph from Mizutani’s maker page. It depicts the toothed tool used for this catalog listing, not the condition of a seller’s individual pair. The embedded design-award graphic is part of that artwork; it does not establish current availability or a measured cutting advantage.
Mizutani’s End of sale category concerns this original generation. The historical retailer links do not verify remaining stock, current pricing or service support. Ask for the actual item’s condition, a dated quote and return terms before ordering.
Other sizes in this series
This catalog groups the two original Puffin thinning models:
The retained 14T and 17T catalog labels are not overall inch measurements or independently verified tooth-count specifications. Both original maker records name Extramarise I and a 63 mm blade, but their cut ratios differ. The separate NEW 17 uses a different alloy and product number; compare its own generation rather than assuming all Puffin variants share one construction.
See the Mizutani brand page for the wider catalog and confirm the exact model when requesting an offer or service.
Features
- Extramarise I Cobalt Alloy named by Mizutani
- Reverse configuration with a 30–40% maker cut ratio
- 63 mm blade length; overall inch size not specified
- Maker-recommended volume adjustment and scissor-over-comb use
Specifications
This page lists 2 of 4 core specifications. Confirm the exact variant with the seller. Suggest a correction.
How it compares
| Attribute | Mizutani Blacksmith Fit Puffin Thinning 14 Hair Thinning Scissors Mizutani | Mizutani Blacksmith Fit Puffin Thinning 17 Hair Thinning Scissors Mizutani | Mizutani Blacksmith Fit Thinning 30 Hair Thinning Scissors Mizutani |
|---|---|---|---|
| Steel | Extramarise I Cobalt Alloy | Extramarise I Cobalt Alloy | Extramarise I Cobalt Alloy |
| Blade type | Thinning | Thinning | Thinning |
| Product links | View product | View product | View product |
Professional Opinion
Compare the documented 30–40% ratio with the original 17’s 20–30% range, then assess the actual pair for the intended work. The model number alone does not establish aggressive texture or disconnection, and the historical specification does not certify a used tool’s condition.
Maintenance Tips
- Provide the exact product number and photographs when arranging service
- Ask the provider to inspect the teeth, opposing blade and pivot together
- Confirm original-model parts rather than assuming NEW-generation compatibility
Frequently Asked Questions
What ratio and configuration does the original Puffin Thinning 14 have?
Mizutani lists product 104236 in reverse configuration with a 30–40% cut ratio. This is the maker’s model specification, not a guaranteed measurement for every technique or hair section. The separately linked LEFTY model is not established by the word reverse.
Is the original Puffin Thinning 14 a 6.0-inch model?
The reviewed maker page supplies a 63 mm blade length but no overall inch designation. Blade length and overall scissor size are separate measurements. The catalog’s 14T and 17T variant labels are not evidence of a 6.0-inch overall size.
How do original and NEW Puffin Thinning 17 differ?
Original 104238 names Extramarise I Cobalt Alloy; NEW 104866 names Extramarise II. Both list reverse 20–30% and a 63 mm blade, but the bottom- and top-blade ring dimensions differ. The shared name and ratio do not establish identical fit or compatible parts.
Can I buy or service the original Puffin Thinning 14?
Mizutani places the original model in End of sale. Remaining retailer stock, a used pair’s condition and present service support require separate checks. Ask for the exact code, photographs, sharpening history, available parts, current quote and return terms.
Sources
- Mizutani: original Fit PUFFIN THINNING 14, reverse configuration (brand official)
- Mizutani: original Fit PUFFIN THINNING 17, reverse configuration (brand official)
- Mizutani: New Fit PUFFIN THINNING 17 generation distinction (brand official)
About Mizutani
Mizutani, founded in 1921: compare exact model materials, published manufacturing records and regional service contacts.
Retailer links, pricing, and specifications notice
About pricing and availability: Guide prices shown are approximate as of the date noted and are provided for comparison purposes only. Actual prices are set by each retailer and may differ. ScissorPedia does not sell scissors directly.
Retailer links: Links to retailer product pages were verified on the dates shown. Products may be renamed, moved, or discontinued by retailers at any time. If a link is broken, try the retailer's brand collection page or let us know.
Specifications: Product details are compiled from manufacturer and retailer sources. For the most current specifications, contact the manufacturer or an authorized retailer directly.
Ratings & reviews
Own the Mizutani Blacksmith Fit Puffin Thinning 14 Hair Thinning Scissors? Rate it and share how it performs to help other professionals.