Mizutani logo

Mizutani Acro Type K Hair Cutting Scissors

by Mizutani · Cutting Scissors

What it is

Mizutani Acro Type K: Extramarise II Cobalt Alloy, four maker-listed sizes, exact product codes and practical fit and service checks.

Available sizes

5.5" 6.0" 6.5" 7.0"

Where to buy

YOI Scissors UK View price Ships from UK Browse all from this brand Link checked 2026-04-03
Scissor Dude View price Ships from USA Browse all from this brand Link checked 2026-04-03
Mizutani USA View price Ships from USA Official Browse all from this brand Link checked 2026-04-03
Mizutani Canada View price Ships from Canada Official Browse all from this brand Link checked 2026-04-03
Mizutani Acro Type K Hair Cutting Scissors

Where this sits

The Mizutani Acro Type K Hair Cutting Scissors uses Extramarise II Cobalt Alloy.

Acro Type K is a Mizutani cutting scissor documented with Extramarise II Cobalt Alloy in four sizes from 5.5 to 7.0 inches. The maker places it in the blunt-cutting category. Its size-specific product numbers distinguish the listed configuration when checking an offer, comparing reach or arranging service.

Maker sizes and product numbers

The ACRO TYPE-K maker record, checked on 30 September 2026, lists:

Nominal size Blade length Maker product number
5.5 inches 55.2 mm 104074
6.0 inches 63 mm 104076
6.5 inches 72 mm 104078
7.0 inches 83 mm 104080

The nominal inch size and millimeter blade length are different measurements. Use the blade column to compare the maker’s stated reach while retaining the inch designation and code when ordering.

Across these four sizes, Mizutani lists the bottom-blade ring as 18 mm horizontally by 21 mm vertically and the top-blade ring as 18 mm by 20 mm. The common ring dimensions do not establish identical balance or fit for every user. Check the actual size in hand when possible, including access to the tips and freedom of thumb movement.

Material and intended use

The exact material designation is Extramarise II Cobalt Alloy. The page identifies blunt cutting as the use category and describes a resin bearing. It does not supply numerical finished hardness or a full alloy composition. Those omissions should not be filled from another cobalt-bearing steel or an unrelated Mizutani model.

Mizutani describes a redesign that retained the original handle shape while changing details of the blade and components. That makes generation relevant when comparing a used Type K with the documented product codes. The family name alone does not establish identical geometry or interchangeable parts across older versions.

Configuration, fit and service

The reviewed listing links separately to Type K LEFTY. Keep its specifications and product numbers separate from the four codes above. A mirrored photograph or a seller’s general ACRO description is insufficient to identify the offered configuration.

For a service enquiry, provide the marked size, product number if available, photographs of both sides and the pivot, and previous sharpening or repair history. Ask whether the provider can identify the generation and obtain its components. A generic claim that another ACRO screw fits is not a model-specific compatibility record.

Before buying, compare handle movement and blade reach for the work you intend to do. The maker’s blunt-cutting category is useful context, but it is not a guarantee of comfort or an independently demonstrated performance advantage over Type A, Precisioner or another model.

Photograph and buying evidence

The displayed photograph comes from the exact Type K maker page; its source asset identifies the 6.0-inch presentation. It illustrates that configuration, not every size or the condition of a seller’s pair. The other three sizes require their own offer details.

The maker catalog was available at review, but a catalog entry does not prove current factory production or a retailer’s stock. The retained retailer links carry their historical context. Confirm the actual item, current quote, service support and return terms directly before purchase.

See the Mizutani brand page for the wider catalog, keeping each model’s evidence separate.

Features

  • Extramarise II Cobalt Alloy named by Mizutani
  • Four maker-listed sizes from 5.5 to 7.0 inches
  • Maker-designated blunt-cutting use
  • Resin bearing described on the model page

Specifications

Handle
Not documented
Blade type
Not documented

This page lists 1 of 4 core specifications. Confirm the exact variant with the seller. Suggest a correction.

How it compares

Similar shears in the same category, side by side (this product first). Open each for full detail and current pricing.
Attribute Mizutani Acro Type K Hair Cutting Scissors Mizutani Mizutani Acro Slider Hair Cutting Scissors Mizutani Mizutani Acro Type G Hair Cutting Scissors Mizutani
SteelExtramarise II Cobalt AlloyCobalt AlloyCobalt Alloy
Sizes (in)5.5· 6.0· 6.5· 7.05.5· 6.05.5· 6.0
Product linksView product View product View product

Professional Opinion

Compare the four documented Type K sizes by blade reach and handle fit. Its named alloy and size table provide a firmer basis than a price-tier ranking; verify the exact product number and configuration when comparing a seller’s pair.

Maintenance Tips

  • Give the model and product number when requesting service
  • Confirm parts for the exact Type K generation and configuration
  • Use the maker’s adjustment instructions for the identified pivot

Frequently Asked Questions

What material does Acro Type K use?

The reviewed maker page names Extramarise II Cobalt Alloy. It does not provide a numeric finished-scissor hardness or complete chemistry. The broader phrase cobalt alloy should not replace the exact designation or imply a ranking against other Mizutani materials.

Which Type K sizes and codes are documented?

Mizutani lists 5.5 inches as 104074, 6.0 as 104076, 6.5 as 104078 and 7.0 as 104080. Their blade lengths are 55.2, 63, 72 and 83 mm respectively. Match both the size and code when checking an offer.

Is the separate Type K LEFTY covered by these codes?

No. The reviewed page links to a separate LEFTY model. The four product numbers on this page belong to the displayed Type K record; do not transfer them to another configuration or infer compatibility from the shared name.

Does the maker listing establish current stock or a mid-range performance tier?

No. It establishes documented material, dimensions and intended blunt-cutting use. An item-specific quote and stock check are still required. No independent comparison reviewed here establishes a performance step above Type A or another ACRO model.

Sources

  1. Mizutani: ACRO TYPE-K exact global model (manufacturer specification)

Source scope and limitations are stated on the page. External links open in new tabs.

About Mizutani

Origin: Japan • Est: 1921

Mizutani, founded in 1921: compare exact model materials, published manufacturing records and regional service contacts.

Products:
Cutting Scissors Thinning Scissors Left-Handed Scissors
Retailer links, pricing, and specifications notice

About pricing and availability: Guide prices shown are approximate as of the date noted and are provided for comparison purposes only. Actual prices are set by each retailer and may differ. ScissorPedia does not sell scissors directly.

Retailer links: Links to retailer product pages were verified on the dates shown. Products may be renamed, moved, or discontinued by retailers at any time. If a link is broken, try the retailer's brand collection page or let us know.

Specifications: Product details are compiled from manufacturer and retailer sources. For the most current specifications, contact the manufacturer or an authorized retailer directly.

Read our full disclaimer.

Community notes

Ratings & reviews

Own the Mizutani Acro Type K Hair Cutting Scissors? Rate it and share how it performs to help other professionals.